i – MESCON 18

OPTIMISATION OF PROCESS PARAMETER IN TURNING OPERATION USING TAGUCHI METHOD (141348)

DOI :

Abstract : Turning process is the one of the methods to remove material from cylindrical and non-cylindrical parts. In any machining process, it is most important to determine the optimal settings of machining parameters aiming at reduction of production costs and achieving the desired product quality. The material removal rate has been identified as the quality traits and assumed to be directly linked to productivity. There are three important cutting parameters namely, cutting speed, feed rates and depth of cut, which has been considered during the turning operation. An Orthogonal array has been constructed to determined the signal-to-noise (S/N) ratio. According to experimental results, depth of cut is determined to be the most important factor on material removal. The objective of this study is to illustrate the procedure adopted in using Taguchi Method to a turning operation. Depth of cut, Spindle speed, Feed rate and Tool Material were used as the process parameters.

Pages : 1-4

Downloads : 1

Publication Date :

Modified Date : 2019-01-03

Cite/Export :

Abhay Shantinath Patil, , Prof. Nitin Ulmek , "OPTIMISATION OF PROCESS PARAMETER IN TURNING OPERATION USING TAGUCHI METHOD", IJIERT - International Journal of Innovations in Engineering Research and Technology, i – MESCON 18, ISSN : 2394-3696, Page No. 1-4